Home / Siemens NX (page 20)

Siemens NX

Split Body siemens NX

Use the Split Body command to split a solid body or sheet body into multiple bodies using a set of faces or a datum plane. You can also create a sketch internal to the command and either extrude or revolve it to create the splitting tool. This command creates an …

Read More »

Trim Body siemens NX

Use Trim Body to trim one or more target bodies using a face or plane. You can specify the portion of the body to retain and the portion to discard. The target bodies take the shape of the trimming geometry. You must select at least one target body. You can …

Read More »

Quilt siemens NX

Use the Quilt command to combine several surfaces into one surface. The system creates a single B-surface that approximates a four-sided region lying on several existing faces. The system projects points from a driver surface along a vector or along the driver surface normal vectors onto the target surfaces (the …

Read More »

Join Face siemens NX

Use the Join Face command to join faces on a body. You can choose from the following two methods: On Same Surface Remove redundant faces, edges, and vertices from selected bodies. If you subdivide a face and subsequently discover that you no longer need the subdivision, you can use this …

Read More »

Patch siemens NX

Use the Patch command to modify a solid body or a sheet body by replacing faces with the faces of another sheet. In this example, the large blue sheet body is the target and the small green sheet body is the tool. Where do I find it? Application Modeling, Shape …

Read More »

Unsew siemens NX

Use the Unsew command to separate an existing sheet body or solid body into multiple bodies. The selected faces are unsewn along the edges of the selected face, resulting in multiple bodies. Unsew is useful in a workflow where you want to perform additional modeling tasks on a specific region …

Read More »

Sew siemens NX

Use the Sew command to join two or more sheet bodies into a new single sheet body. If the collection of sheet bodies encloses a volume, a solid body is created. The selected sheet bodies must not have any gaps larger than the specified tolerance, or the resulting body will …

Read More »

Emboss Sheet siemens NX

Use the Emboss Sheet command to modify a sheet body by adding faces of a solid body, as if the solid body was pressed into the sheet body. Sheet metal models are embossed to: Increase a metal panels stiffness and rigidity. Increase the surface area for heat transfer or acoustic …

Read More »

Intersect siemens NX

You can intersect solids with solids, sheets with sheets, and a sheet with a solid. If you select a sheet body as a tool body, the result is a fully parameterized Intersect feature with all regions kept. If the tool body completely splits the target body into multiple solid bodies …

Read More »

Subtract siemens NX

Use the Subtract command to remove the volume of one or more tool bodies from a target body. When you use the Subtract command: You can select a Group of bodies as the tool. 1¬†Group of bodies as tool 2¬†Resulting Subtract feature If you select a sheet body as a …

Read More »