Home / Vero Visi Help

Vero Visi Help

Springback by Measured Machines in Visi Progress


Overview Description: This utility allows to recalculate the compensated part in order to obtain the nominal part after the stamping process, avoiding the springback effect. This function, starting from the nominal part (surface), and importing the measured points by measured machine, calculates the opposite points, giving the possibility to add ...

Read More »

Ribs feature in Visi Progress


Overview Description: There are 2 kinds of ribs: by two points, by path curve. Basically the feature is the result of a profile along a curve. The shape of profile is drawn by feature properties. Parameters Description: If you require further information on any parameter in the image below, point ...

Read More »

Bosses feature in Visi Progress


Overview Description: There are 3 kinds of bosses: by one point, by two points, by path curve. The boss can be done closed or opened. Basically the feature is the result of a profile along a curve, or a profile revolution. The shape of profile is drawn by feature properties. ...

Read More »

Ribs & Bosses in Visi Progress


Overview Description: These features are used to strengthen a sheet metal part. The command works only with skins (not solids). At the beginning, the system asks a body (skin) selection. TAB Description: The Ribs & Bosses command is divided in 2 kinds of features: Bosses & Ribs Boss Rib Note: ...

Read More »

Cylndrical Drawing in Visi Progress


Overview Description: This application allows to calculate all the steps relative to the Cylindrical Drawing starting from a revolution profile. Selecting this command from Progress menu, the system needs to select the reference profile, then the revolution axis and the relative point and the thickness side: 2D profile selection, and ...

Read More »

Strip study in Visi Progress


Overview Description: After to have studied a part using the Part Study management or one of our Flange off-line functionalities (Flange Unfolding, Linear Flange, Blank Unfolding, VISI Blank), we can define and create a Real Strip. First of all, to create the 3D Strip, is absolutely necessary have the Blank ...

Read More »

Part Solids in Visi Progress


Overview Description: In this section is possible create the 3D Solid Parts of each step. This function is useful during the strip definition, because the created solids could be used to sobstitute the parts in strip. Selecting the first icon Rebuild 3D Parts, the system automatically creates all the different ...

Read More »

Part Step in Visi Progress

Overview Description: In this section is possible start the unfolding process; selecting the sequence of linear bends to unfold and adding new steps. Clicking on the first icon Add a Step, the system creates a copy of the previous part, adding a step and giving the possibility to change the ...

Read More »

Unfolding in Visi Progress


Overview Description: The second step of the unfolding process, is create the blank part. In this section is possible select three different methods, to obtain the right result: Automatic Unfolding Optimize Automatic Unfolding On Tree Manual Unfolding It’s important note that, during this and next process, in case of Not ...

Read More »

Part Analysis in Visi Progress


Overview Description: The first mandatory step to obtain your flattened component, is to analyse the types of face used in the construction of the model. In the Part Analysis section it is possible to select the part, defining the meaning and relevant parameters of each face. If some features have ...

Read More »