Home / Vero Visi Help / Visi Mould

Visi Mould

Holes interference visi mould

z10

Overview Description: This utility allows to check the minimum distance between cavities and holes of solid. Parameters Description: If you require further information on any parameter in the image below, point to it (the cursor changes shape) and click.  

Read More »

Body intersections with visi mould

z9

Overview Description: This utility finds the intersection between solids and/or surfaces. Two possible result are available: Show Intersections: in this case are shown solids of intersection Show Curves of intersection: in this case are shown wireframes of intersection Parameters Description: If you require further information on any parameter in the ...

Read More »

Body Distances in vero visi

z8

Overview Description: This utility checks the interferences between solids and/or surfaces. After 3D entities selection, the system recognizes where interferences are present, and divides the entities selected in one or more “interference group”. Parameters Description: If you require further information on any parameter in the image below, point to it ...

Read More »

Body interference in Visi

z7

  Description: This utility checks the interferences between solids and/or surfaces. After 3D entities selection, the system recognizes where interferences are present, and divides the entities selected in one or more “interference group”. Parameters         Description: If you require further information on any parameter in the image below, point to it ...

Read More »

Lock Builder Input in Vero Visi

z6

Overview Description: Here the right sequence of operations to insert a Lock Builder: Select which shape and type you want insert, clicking on the relative icon on tool bar Select X axis that is the Lock Width building direction Select the Insertion Point that must be placed on the reference ...

Read More »

Visi mould 2D Overview

z3

Description: This application has been thought to plane a mould plates, starting from simple 2D profiles. Some suppliers gave the possibility to export from digital catalogue the 2D mould plates layout. Using this geometry it is now possible to obtain quickly the 3D plates layout; the 2D views used by ...

Read More »